Taxes included.
Powerindustries Control Unit
The PCU is the easiest way to improve the performance of your BMW M5 G90 (Saloon) or G99 (Touring): +100 hp and +100 Nm on top of the original output.
- No engine control unit unlock required
- Easy installation with instructions
- No effect on warranty
- Can be transferred to another vehicle
- Fully developed software
- No problem with BMW updates
As a simple plug-and-play solution, the PCU is installed between the original engine control unit and the engine sensors, so you can make optimal use of your M5's power reserves. The PCU can be installed and removed easily without changing anything in the original engine control unit. This means your car can be returned to standard at any time, for example for a dealer visit or when you sell it.
How does an advanced external ECU work?
1. Engine speed: the Powerindustries external ECU is an advanced computer that receives the engine speed via the camshaft signal or directly via the CAN bus (which carries all information about the car's engine).
2. Torque calculation: the external ECU calculates the torque (pulling power) and measures the engine's acceleration. We read the engine load directly from the CAN bus signal.
3. Extended injection time: via the MAP sensor, the fuel injection time is indirectly extended, so the injectors spray fuel into the engine for longer.
4. Turbo spool-up point: this point is adjusted so the engine delivers more pulling power at lower engine speeds.
5. Boost pressure adjustment: boost pressure is increased, giving more pulling power across a wider rev range, together with more power.
6. Maximum boost pressure monitoring: boost pressure monitoring remains fully intact, and the maximum boost pressure we set is never exceeded.
7. Load-dependent adjustment: the fuel quantity is adjusted dynamically to the accelerator pedal position and the driver's demand, so the available power is used far more efficiently.
8. Fuel saving: with professional tuning by Powerindustries, fuel pressure is already increased at low engine speeds. This atomises the fuel more finely and burns it more efficiently, so you achieve the same power with less fuel. If you want more power, the ECU simply injects more fuel.
In this way, the PCU delivers more power and efficiency while also allowing you to save fuel.