Taxes included.
Power Industries Control Unit
The PCU is the easiest way to boost the performance of your BMW M3 / M4 to up to 650 hp and 900 Nm.
- No Femto unlock needed
- Easy installation with instructions
- No effect on warranty
- Can be transferred to another vehicle
- Fully developed software (dyno tested)
- No problem with BMW updates
As a simple plug-and-play solution, the PCU is installed between the original engine control unit and the engine sensors, so you make optimal use of your vehicle's power reserves. The PCU can be installed and removed easily without affecting the original engine control unit.
How does an advanced external ECU work?
1. Engine speed: the Power Industries external ECU is an advanced computer that receives the engine speed via the camshaft signal or directly via the CAN bus (which carries all the information about the car's engine).
2. Torque calculation: the external ECU can calculate the torque (pulling power) and measures the engine's acceleration. Using the CAN bus signal, we can read the engine load directly.
3. Longer injection duration: via the MAP sensor, the fuel injection duration is indirectly extended, so the injectors spray fuel into the engine for longer.
4. Turbo spool point: the moment the turbo starts to spool is adjusted, so the engine delivers more pulling power at lower revs.
5. Boost adjustment: boost pressure is increased, resulting in more pulling power available over a wider rev range, together with an increase in power.
6. Maximum boost monitoring: boost monitoring remains fully intact, and the maximum boost we set is never exceeded.
7. Load-dependent adjustment: the amount of fuel is adjusted dynamically based on throttle pedal movement and the driver's demand, so the available power is used much more efficiently.
8. Fuel saving: with professional chip tuning from Power Industries, fuel pressure is increased even at low revs. This means the fuel is atomised more finely and burned more efficiently, so you can achieve the same power with less fuel. If you want more power, the ECU can inject more fuel instead.
This way the PCU delivers more power and efficiency, while also letting you save fuel.